Adhesive for cork glue down tiles and Cork wall tiles
×

Wakol D3540 5L Cork Floor and Cork Wall Tile Adhesive

£75.99 each
  • Solvent Free
  • Very Low Emissions
  • High Initial Strength
  • Immediately Suitable for Walking on
  • Suitable for Castor Chairs
  • Suitable for Underfloor Heating
  • Endorsed by Cork Manufacturers

Description

Dispersion-based contact adhesive for laying cork parquet, waxed and pre-sealed cork tiles without coated backing, on absorbent and non-absorbent subfloors as well as on permanent, existing floor coverings indoors. Also suitable for cork wall coverings and laying carpets on steps.

To be used with the Glue down Cork Tiles and the Decodalle Wall Tiles and the Carioca Wall tiles, Facing material

Specification

AIRING TIME 30-45 mins on absorbent subfloors; 60-90 mins on non-absorbent subfloors and on the back of the floor covering
CLEANING AGENT water before adhesive dries
CONSUMPTION min 250 g/m² for laying cork, otherwise 150-650 g/m²
COVERAGE 20m²
METHOD OF APPLICATION with shorthair velours roller on cork wall coverings, for carpet
OPEN TIME 120-180 mins; with pre-coating 60-90 mins
PACK SIZE 5Kg
RAW MATERIAL BASE latex/acrylate dispersion
STORAGE TEMPERATURE not below +5°C, frost sensitive
STORAGE TIME 12 months at room temperature
Application and consumption  Short-haired velour roller at least 250 g/m² Cork flooring TKB A1 - A3 150 - 650 g/m² Textile flooring

Shipping and Return

Orders processed before noon can generally be despatched the same day to be with you within 2 days. We provide samples for all our floor and wall products. Do not order a floor without obtaining a sample from us beforehand - they can be obtained at little or no cost to you.

Do not order at the last moment. Whilst we endeavour to keep stock levels high, we sometimes have large orders or brexit delays from Portugal so we recommend ordering well in advance. Furthermore, all natural flooring products require at least a few days to acclimatise in the room of installation. Delivery schedules are given in good faith. We cannot accept liability for delays. We advise you to arrange installation after receipt of your flooring. Charges assume there is free and easy access to the delivery address otherwise it may incur delays and additional fees.

We use third-party delivery agents and thus cannot be in full control of the delivery process. Therefore it is best to give us as much information regarding your special circumstances such as parking restrictions, narrow roads and postcode anomalies.

Except for samples, all deliveries require someone to be present at the delivery address. Unfortunately, drivers are unable to deliver to neighbours unless this is specified at the time of ordering. Larger consignments, typical over 150Kg, will be delivered by pallet. This pallet can only be dropped at the kerbside of the delivery address, so you must be prepared to carry the goods which may require 2 people as a pack of flooring can weigh up to 16Kg. Currently, our pallet service does not have real-time tracking. To aid delivery, we ask you to provide a phone number to contact you on the delivery day. If your premises has bad mobile reception please also provide a landline number if possible.

In the rare event that your goods have been damaged in transit, it is important to sign for the goods as damaged and notify us with 1 working day. Photographs aid greatly in these circumstances.

Returns

We are confident that you will be delighted with your purchase. However, if you change your mind, you are welcome to return the goods at your expense within 14 days as long as they're in a re-saleable condition and receive your money back. After 14 days we may charge a 15% restocking fee if an alternative product is not sought from us.

These terms do not affect your rights under the Distance Selling Regulations and Consumer Rights Act.



Quantity and measuring Guide

The adage “Measure Twice” comes to mind here, so it’s a good idea to get a professional such as your fitter to double-check your measurements.

Sizing your Room

If your room is rectangular the square meterage can be calculated with the simple formula
Area (sqm) = Width (m) x length (m)
If your room is more complicated (e.g. L-shaped or alcoves) we find the easiest way is to subtract areas from the whole.

Calculating the number of packs.

During installation, you will lose a small amount of flooring to “cutting losses”. Simple rooms typically have a lower loss such as 6% and more complicated areas 10-12%.
Number of packs required = (Area x cutting loss) / Pack Size, rounded up.
For example, a room measuring 4m x 5m has an area of 20sqm. If the flooring has a pack size of 1.91sqm, then the number of packs would be 20 x 1.06 / 1.91 = 11.10, thus 12 packs would be required.
The calculator on the product ordering page can do this calculation for you.



Installation

Like laminate flooring, this product is easy to install by a competent DIYer. Our full guide can be found here.

Click Here





Adhesive for cork glue down tiles and Cork wall tiles

Wakol D3540 5L Cork Floor and Cork Wall Tile Adhesive

£75.99